Tera ohm meter with touch display incl. measuring electrodes

Description

Teraohmmeter for standard-compliant measurement of resistors according to standards of the series IEC / EN / DIN 61340 and ANSI/ESD STM measuring voltage 10 V, 100 V, 500 V and 1kV.

The TERA OHMmeter TE3610 is ideal for mobile use in industrial areas due to its compact design and battery operation. However, it can also be operated stationary with a plug-in charger.

The TE3610 is operated via only 2 buttons and the touch panel, is menu-controlled and therefore very user-friendly. All set measurement parameters are displayed on the display for better orientation.

The included PC software also allows the TE3610 to be operated computer-controlled. In addition, measurement results can be managed and further processed.

The TE3610 works according to the voltage measurement method. The measurement time prescribed in the standard can be set via the internal timer to carry out the measurements according to specified standards, such as .B. DIN EN 61340 or EOS-ESD 4.1/6.1. As a world first, the “break-down” resistance and the “break-OFF” time can be measured.

The measured values including the environmental parameters can be stored in the internal EEPROM. (up to 200 records) As a result, these are retained after switching off the device and can be read out at a later time via the USB interface.

Since the resistance values depend very much on the humidity and the room temperature, these influences are measured and stored together with the resistance value. This ensures a reproducible measurement. The date and time are also saved.

Codes

TE3610