AUTO FEEDER
CA – Solder Feed Station
It is the ideal station for applications requiring a freehand like wire soldering to PCB, connectors or transformers and for intensive soldering of THT components.
It provides the best soldering quality thanks to JBC Most Efficient Soldering System and additionally Sleep & Hibernation modes help to extend life of tips.
This Station comes with the AP250 Solder Feed Iron that works with C250 cartridges.
As all the Compact Stations, the CA has a menu with more than 10 parameters to customize the control unit.
Downloads & Resources
Selectable Temperature
90 to 450 ºC / 190 to 840 ºF
Connectivity
USB-B
Software PC / Firmware update
Equipotential bonding
Optional connection to EPA
ESD/EOS
ESD safe
Tip to ground resistance
<2 ohms
Tip to ground voltage
<2 mV RMS
Power supply
Peak power
130 W – 23,5 V
Ambient operating temp.
10 to 50 ºC / 50 to 120 ºF
Dimensions and weight
Control Unit
150 x 175 x 145 mm / 2,67 kg
5.9 x 6.9 x 5.7 in / 5.88 lb
Package
234 x 234 x 258 mm / 3.15 kg
9.2 x 9.2 x 10.2 in / 6.94 lb
ALE – Auto-Feed Soldering Station
It is the ideal solution for soldering processes requiring a free hand. It works with the comfortable ALE250 Auto-Feed Iron and C250 Cartridge Range.
You can easily configure parameters such as dispensed wire speed and length thanks to its newly upgraded 7-key keypad. You can also monitor the solder consumption thanks to integrated counters.
3 working modes:
In Continuous Mode solder wire is fed while the button keeps pressed. Discontinuous Mode allows the configuration of the speed and the solder wire amount that will be fed on each click. Program Mode enables the operator to configurate 3 consecutive feeding steps, obtaining a more dynamic and efficient soldering. Up to 5 programs can be set.
Solder Wire Perforation:
The solder feeder features a small blade that perforates the solder wire down to the flux core while feeding it. This perforation process allows better flux flow and outgassing, avoiding solder and flux splashing when soldering.
The included GALE10V Guide Kit makes this station compatible with Ø 1.0 mm / 0.04 in single-core solder wire. If you require a different guide-kit size, please contact us.
Furthermore, this station allows a solder reel up to 2 kg / 4.40 lb (DIN 100).
Available guide sets make this tool compatible with 0.4 to 1.8 mm solder wire.
Downloads & Resources
Dimensions and weight
SF – Automatic Solder Feeder
This Solder Feeder allows you to feed solder wire automatically from any position.
You can easily configure parameters such as dispensed wire speed and length. You can also monitor the solder consumption thanks to integrated counters.
3 working modes:
Continuous, discontinuous and program mode. In each program you can configure up to 3 steps with different dispensed wire length and speed. Up to 35 programs can be executed, cyclically programmable.
Solder Wire Perforation:
The solder feeder features a small blade that perforates the solder wire down to the flux core while feeding it. This perforation process allows better flux flow and outgassing and avoids solder and flux splashing when soldering
The SF includes the ergonomic SF280-A Solder Feed Handle and the Ø 1 mm GSF10V Guide Set. Compatible Guide Sets are also without Solder Wire Perforation available.
Downloads & Resources
Spool Capacity
up to 1 kg (2.2 Ib)
Solder wire diameter
1 mm (0.04 in)
More diammeters available. See guide sets for SF280.
Voltage
100-120V (0.2A), 230V (0.125A)
Maximum Speed
120 mm/s
Ambient operating temp.
10-40 °C (50-104 °F)
Communication connectors
USB-B, peripherals, RJ12 for RS-232 connection
Dimensions and weight
Package dimensions
368 x 368 x 195 mm
14.49 x 14.49 x 7.68 in