STANDARD
CDE-B – Smart Soldering Station
JBC revolutionizes the hand soldering with the Soldering Assistant mode, the first system that measures the delivered energy during the soldering process.
The Soldering Assistant is easy to use: select a cartridge, perform a soldering and save it as solder reference. All the soldering performed after will be compared with the solder reference, displaying information between them.
Why Soldering Assistant?
It will help to improve the soldering skills of the less experts, to select the optimal temperature and cartridge and to have a more efficient and quality production
It comes with the JBC exclusive Heating System and the intelligent Sleep & Hibernation features.
This Station is suitable for precision soldering with a T245 Handle, the ideal tool when working on populated PCBs or under a microscope, and works with C245 Cartridges.
It features all the Excellence range benefits such as full control of soldering processes and remote work management.
Downloads & Resources
Equipotential bonding
Optional connection to EPA
ESD/EOS – ESD safe
Tip to ground resistance
<2 ohms
Tip to ground voltage
<2 mV RMS
ESD/EOS – ESD safe
Tip to ground resistance
<2 ohms
Tip to ground voltage
<2 mV RMS
Power supply
Peak power
150 W – 23.5 V
Ambient operating temp.
10 to 50 ºC / 50 to 120 ºF
Dimensions and weight
compact
170 x 154 x 106 mm / 2.67 kg.
6.69 x 6.06 x 4.17 in / 5.88 lb.
Package
234 x 234 x 258 mm / 3.15 kg.
9.21 x 9.21 x 10.16 in / 6.94 lb.
CD-B – General Purposes Station
It is the ideal soldering station for general electronic applications with a T245 Handle.
It provides the best soldering quality thanks to JBC Most Efficient Soldering System and additionally Sleep & Hibernation modes help to extend life of tips.
Cartridge extractor facilitates fast and safe cartridge change of different tip geometries.
More than 150 cartridges of the C245 range of different geometries are available.
As all the Compact Stations, the CD has a menu with more than 10 parameters to customize the control unit.
Downloads & Resources
Selectable Temperature
90 to 450 ºC / 190 to 840 ºF
Connectivity USB-B
Software PC / Firmware update
Equipotential bonding
Optional connection to EPA
ESD/EOS – ESD safe
Tip to ground resistance
<2 ohms
Tip to ground voltage
<2 mV RMS
Power supply
Peak power
130 W – 23.5 V
Ambient operating temp.
10 to 50 ºC / 50 to 120 ºF
Dimensions and weight
compact
145 x 150 x 175 mm / 2.67 kg.
5.71 x 5.91 x 6.89 in / 5.88 lb.
Package
234 x 234 x 258 mm / 3.15 kg.
9.21 x 9.21 x 10.16 in / 6.94 lb.
CA – Solder Feed Station
t is the ideal station for applications requiring a freehand like wire soldering to PCB, connectors or transformers and for intensive soldering of THT components.
It provides the best soldering quality thanks to JBC Most Efficient Soldering System and additionally Sleep & Hibernation modes help to extend life of tips.
This Station comes with the AP250 Solder Feed Iron that works with C250 cartridges.
As all the Compact Stations, the CA has a menu with more than 10 parameters to customize the control unit.
Downloads & Resources
Selectable Temperature
90 to 450 ºC / 190 to 840 ºF
Connectivity USB-B
Software PC / Firmware update
Equipotential bonding
Optional connection to EPA
ESD/EOS – ESD safe
Tip to ground resistance
<2 ohms
Tip to ground voltage
<2 mV RMS
Power supply
Peak power
130 W – 23.5 V
Ambient operating temp.
10 to 50 ºC / 50 to 120 ºF
Dimensions and weight
compact
150 x 175 x 145 mm / 2,67 kg
5.9 x 6.9 x 5.7 in / 5.88 lb
Package
234 x 234 x 258 mm / 3.15 kg
9.2 x 9.2 x 10.2 in / 6.94 lb
PRECISION
CD-S – Precision Soldering Station
his station is suitable for precision soldering with a T210 Handle, the ideal tool when working on populated PCBs or under a microscope.
It provides the best soldering quality thanks to JBC Most Efficient Soldering System and additionally the Hibernation Mode help to extend life of tips.
The Cartridge Extractor facilitates fast and safe cartridge change.
More than 30 cartridges of the C210 range of different geometries are available.
As all the Compact Stations, the CD has a menu with more than 10 parameters to customize the control unit.
Downloads & Resources
Selectable Temperature
90 to 450 ºC / 190 to 840 ºF
Connectivity USB-B
Software PC / Firmware update
Equipotential bonding
Optional connection to EPA
ESD/EOS – ESD safe
Tip to ground resistance
<2 ohms
Tip to ground voltage
<2 mV RMS
Power supply
Peak power
40 W – 23,5 V
Ambient operating temp.
10 to 50 ºC / 50 to 120 ºF
Dimensions and weight
compact
150 x 175 x 145 mm / 2.67 kg
5.9 x 6.9 x 5.7 in / 5.88 lb
Package
234 x 234 x 258 mm / 3.10 kg
9.2 x 9.2 x 10.2 in / 6.82 lb
CP – Micro Tweezers Station
The CP Station is the best solution for soldering and rework of SMT components like chips and small/medium SOP that require the highest precision. Watch video for reworking examples.
It provides the best soldering quality thanks to JBC Most Efficient Soldering System and additionally Hibernation mode help to extend life of tips.
This station comes with the Adjustable Micro Tweezers AM120 that works with C120 cartridges.
As all the Compact Stations, the CP has a menu with more than 10 parameters to customize the control unit.
Downloads & Resources
Selectable Temperature
90 to 450 ºC / 190 to 840 ºF
Connectivity USB-B
Software PC / Firmware update
Equipotential bonding
Optional connection to EPA
ESD/EOS – ESD safe
Tip to ground resistance
<2 ohms
Tip to ground voltage
<2 mV RMS
Power supply
Peak power
80 W – 23,5 V
Ambient operating temp.
10 to 50 ºC / 50 to 120 ºF
Dimensions and weight
compact
150 x 175 x 145 mm / 2.70 kg
5.9 x 6.9 x 5.7 in / 5.96 lb
Package
234 x 234 x 258 mm / 3.15 kg
9.2 x 9.2 x 10.2 in / 6.94 lb
CS – Desoldering Station with Electric Pump
The CS Station is equiped with the MS-A Electric Pump and is ideal for desoldering the smallest plated through hole components and removing solder from surface mount pads.
This Station comes with the comfortable DS360 Micro Desoldering Iron which uses the JBC exclusive Heating System and the intelligent Sleep & Hibernation features.
As all the Compact Stations, the CS has a menu with more than 10 parameters to customize the control unit.
Downloads & Resources
Selectable Temperature
180 to 450 ºC / 360 to 840 ºF
Vacuum
75% / 570 mmHg / 22.4 inHg
Flow rate
9 SLPM
Connectivity USB-B
Software PC / Firmware update
Equipotential bonding
Optional connection to EPA
ESD/EOS – ESD safe
Tip to ground resistance
<2 ohms
Power supply
Peak power
40 W – 23,5 V
Ambient operating temp.
10 to 50 ºC / 50 to 120 ºF
Dimensions and weight
compact
150 x 175 x 145 mm / 4.0 kg
5.9 x 6.9 x 5.7 in / 8.82 lb
Package
495 x 295 x 255 mm / 5.47 kg
19.5 x 11.6 x 10 in / 12.06 lb
DDPE – 2 Tools DDE Precision Station
DDPE Precision Rework Station is a perfect solution for fast and precise SMD rework of chip components and small outline ICs.
The DDE Control Unit manages up to 2 tools simultaneously and is fully compatible with 10 different JBC tools. Check below the complete list of compatible tools.
This rework station comes with the T210 Precision Purpose Handle and the AM120 Adjustable Micro Tweezers. The short distance tip-to-grip of both tools provides the highest precision handling even under microscope.
The Precision Handle T210 work with C210 cartridges and the AM120 with C120 cartridges whose exceptional thinness allows reworking components on heavily populated PCBAs without disturbing nearby components.
Downloads & Resources
Selectable Temperature
90 to 450 ºC / 190 to 840 ºF
Connectivity
USB-B (rear)
Software PC / Traceability
USB-A (front)
Firmware update Soldering Graphics management
Robot
RS-232 remote control or Smart Fume Extractor connection.
Equipotential bonding
Optional connection to EPA
ESD/EOS – ESD safe
Tip to ground resistance
<2 ohms
Tip to ground voltage
<2 mV RMS
Power supply
Peak power
150 W per tool – 23.5 V
Ambient operating temp.
10 to 50 ºC / 50 to 120 ºF
Dimensions and weight
Control Unit
148 x 120 x 232 mm / 3.82 kg
5.8 x 4.7 x 9.1 in / 8.41 lb
Package
474 x 368 x 195 mm / 8.79 kg
18.7 x 14.5 x 7.7 in / 19.4 lb
HIGH PRECISION
JNASE – Hot Air Station
This is the smallest hot air station in the market.
It is perfect for reworking SMD components on surfaces with minimal separation.
It allows easy reworking of ultra-miniature SMD components (01005) under the microscope.
It enables flow regulation of temperatures and air at very low levels in order to avoid the expulsion/movement of adjoining components.
JBC offers three cartridge sizes with outlet diameters of 0.8, 1 and 1.2 mm, which are easily interchangeable.
The station includes a Pick & Place activated by pedal to position and remove components with high precision.
Downloads & Resources
Nominal power
70 W
Temperature selection
Room temp. / 150 – 450 °C (300 – 840 °F)
Cool mode
T off. Used to blow air at room temperature
Ambient operating temp.
10 – 50 ºC (50 – 122 ºF)
Air flow regulation
0,15 – 1 SLPM
Vacuum
53% / 397 mmHg / 15,6 inHg
Communication connectors
USB-A / USB-B
RJ12 for RS232
Pedal / Stand
Complies with CE standards
ESD protected
Dimensions and weight
Control Unit
170 x 180 x 110 mm / 1,35 kg
6.7 x 7.1 x 4.3 in / 2.96 lb
Package
370 x 370 x 200 mm / 4,06 kg
14.6 x 14.6 x 7.9 in / 8.95 lb
NASE – 2 Tools Nano Rework Station
The NASE Station is the best solution for soldering and rework of SMT components requiring the highest precision. Watch video for soldering examples.
It works with the JBC Most Efficient Soldering System and the intelligent Hibernation mode.
This station comes with the NT115-A Nano Handle and the AN115-A Adjustable Nano Tweezers. The short distance from the tip to the handle offers maximum control even when using a microscope.
The NASE-C Rework Station works with the C115 Cartridge Range.
As all the JBC Stations, the NANE has a menu with more than 10 parameters to customize the control unit.
Downloads & Resources
Selectable Temperature
90 to 450 ºC / 190 to 840 ºF
Connectivity
Pedal ( 1 per tool)
Connect a pedal (ref.P-405) to control the tools. It allows using Nano tweezers for soldering.
USB-B (rear)
Software PC / Traceability
USB-A (front)
Firmware update Soldering Graphics management
Robot
RS-232 remote control or Smart Fume Extractor connection.
Equipotential bonding
Optional connection to EPA
ESD/EOS – ESD safe
Tip to ground resistance
< 2 ohms
Tip to ground voltage
< 2 mV RMS
Power supply
Peak power
14 W per tool – 8.5 V
Ambient operating temp.
10 to 50 ºC / 50 to 120 ºF
Dimensions and weight
Control Unit
170 x 90 x 135 mm / 2,50 kg
6.7 x 3.5 x 5.3 in / 5.40 lb
Package
280 x 280 x 164 mm / 2,99 kg
11.0 x 11.0 x 6.5 in / 6.59 lb
NANE – 2 Tools Nano Soldering Station
The NANE Station is the best solution for soldering and rework of SMT components requiring the highest precision.
It works with the JBC Most Efficient Soldering System and the intelligent Hibernation mode.
This station comes with two NT115 Nano Handle. The short distance from the tip to the handle offers maximum control even when using a microscope.
The NASE-C Rework Station works with the C115 Cartridge Range.
As all the JBC Stations, the NANE has a menu with more than 10 parameters to customize the control unit.
Downloads & Resources
Selectable Temperature
90 to 450 ºC / 190 to 840 ºF
Connectivity
Pedal ( 1 per tool)
Connect a pedal (ref.P-405) to control the tools. It allows using Nano tweezers for soldering.
USB-B (rear)
Software PC / Traceability
USB-A (front)
Firmware update Soldering Graphics management
Robot
RS-232 remote control or Smart Fume Extractor connection.
Equipotential bonding
Optional connection to EPA
ESD/EOS – ESD safe
Tip to ground resistance
< 2 ohms
Tip to ground voltage
< 2 mV RMS
Power supply
Peak power
14 W per tool – 8.5 V
Ambient operating temp.
10 to 50 ºC / 50 to 120 ºF
Dimensions and weight
Control Unit
170 x 90 x 135 mm / 2,50 kg
6.7 x 3.5 x 5.3 in / 5.40 lb
Package
280 x 280 x 164 mm / 2,94 kg
11.0 x 11.0 x 6.5 in / 6.49 lb
AUTOFEEDER
AL – Auto-Feed Soldering Station
AL station works with the comfortable AL250 Auto-Feed Iron and C250 cartridges.
It is the ideal solution for soldering processes requiring a free hand.
With a single press of a button, the tool automatically feeds the precise amount of solder programmed in the station. This feature makes the AL the perfect tool when solder amount consistency is required across repetitive solder joints.
It provides the best soldering quality thanks to JBC Most Efficient Soldering System and additionally Sleep & Hibernation modes help to extend life of tips.
Wire dispensing speed and length are easy programmable.
Available guide sets make this tool compatible with 0.4 to 1.8 mm solder wire.
Downloads & Resources
Selectable parameters
Selectable Temperature
90 to 450 ºC / 190 to 840 ºF
Solder wire length
1 to 60 mm / 0.04 to 2.36 in
Solder wire speed
0.5 to 30 mm/s / 0.02 to 1.2 in/s
Operating modes
Continuous / Discontinuous
Solder compatibility
Wire diameter
0.4 to 1.8 mm / 0.02 to 0.07 in
Special features
Sleep and Hibernation mode
These modes lower soldering tip temperature when the tool rests in the stand in order to avoid oxidation and extending tip life.
Max/Min temperature and
solder wire length/speed:
Limits the ranges of temperature, solder wire feeding length and speed in which the operator is allowed to work.
PIN protection
Keep station parameters protected against unauthorized access.
ESD/EOS / ESD safe
Tip to ground resistance
<2 ohms
Tip to ground voltage
<2 mV RMS
Power supply
Peak power
130 W – 23.5 V
Ambient operating temp.
10 to 40 ºC / 50 to 104 ºF
Dimensions and weight
Control Unit
195 x 200 x 240 mm / 5.81 kg
7.7 x 7.9 x 9.4 in / 12.81 lb
Package
368 x 368 x 195 mm / 6.72 kg
14.5 x 14.5 x 7.7 in / 14.82 lb
SF – Automatic Solder Feeder
This Solder Feeder allows you to feed solder wire automatically from any position.
You can easily configure parameters such as dispensed wire speed and length. You can also monitor the solder consumption thanks to integrated counters.
3 working modes:
Continuous, discontinuous and program mode. In each program you can configure up to 3 steps with different dispensed wire length and speed. Up to 35 programs can be executed, cyclically programmable.
Solder Wire Perforation:
The solder feeder features a small blade that perforates the solder wire down to the flux core while feeding it. This perforation process allows better flux flow and outgassing and avoids solder and flux splashing when soldering
The SF includes the ergonomic SF280-A Solder Feed Handle and the Ø 1 mm GSF10V Guide Set. Compatible Guide Sets are also without Solder Wire Perforation available.
Downloads & Resources
Spool Capacity
up to 1 kg (2.2 Ib)
Solder wire diameter
1 mm (0.04 in)
More diammeters available. See guide sets for SF280.
Voltage
100-120V (0.2A), 230V (0.125A)
Maximum Speed
120 mm/s
Ambient operating temp.
10-40 °C (50-104 °F)
Communication connectors
USB-B, peripherals, RJ12 for RS-232 connection
Dimensions and weight
Package dimensions
368 x 368 x 195 mm
14.49 x 14.49 x 7.68 in
HOT AIR
JNASE – Hot Air Station
This is the smallest hot air station in the market.
It is perfect for reworking SMD components on surfaces with minimal separation.
It allows easy reworking of ultra-miniature SMD components (01005) under the microscope.
It enables flow regulation of temperatures and air at very low levels in order to avoid the expulsion/movement of adjoining components.
JBC offers three cartridge sizes with outlet diameters of 0.8, 1 and 1.2 mm, which are easily interchangeable.
The station includes a Pick & Place activated by pedal to position and remove components with high precision.
Downloads & Resources
Nominal power
70 W
Temperature selection
Room temp. / 150 – 450 °C (300 – 840 °F)
Cool mode
T off. Used to blow air at room temperature
Ambient operating temp.
10 – 50 ºC (50 – 122 ºF)
Air flow regulation
0,15 – 1 SLPM
Vacuum
53% / 397 mmHg / 15,6 inHg
Communication connectors
USB-A / USB-B
RJ12 for RS232
Pedal / Stand
Complies with CE standards
ESD protected
Dimensions and weight
Control Unit
170 x 180 x 110 mm / 1,35 kg
6.7 x 7.1 x 4.3 in / 2.96 lb
Package
370 x 370 x 200 mm / 4,06 kg
14.6 x 14.6 x 7.9 in / 8.95 lb
TESE – Precision Hot Air Station
The TESE is a precision hot air Station capable of reworking small and medium SMDs. Watch video for examples.
The combination of the exclusive JBC hot air system with protectors, tripods and extractors ensures desoldering components easily and safety, concentrating the heat on the selected component as show:
Downloads & Resources
Selectable Temperature
150 to 450 ºC (300-840 ºF)
Air flow
2 to 17 SLPM
Temperature profiles:
Design specific thermal profiles to avoid thermal shock during soldering processes.
Up to 25 fully configurable soldering profiles can be stored.
Operating modes
Heating / Profiles / Cooling
Vacuum
30% / 228 mmHg / 9 inHg
Connectivity
Type K thermocouple:
Can be used both for Control and Protection purposes.
USB-B (rear)
Software PC
USB-A (front)
Firmware update, Graphics / Profiles management
Robot
RS-232 remote control
Pedal
Optional tool control
Equipotential bonding
Optional connection to EPA
ESD/EOS
ESD safe
Power supply
Peak power
300 W
Ambient operating temp.
10 to 50 ºC / 50 to 120 ºF
Dimensions and weight
Premium Stations
230 x 148 x 160 mm / 4.72 kg.
9.06 x 5.83 x 6.30 in / 10.41 lb.
Package
474 x 368 x 195 mm / 5.69 kg.
18.66 x 14.49 x 7.68 in / 12.54 lb.
JTSE – Hot Air Station
The JTSE is a high powered hot air Station capable of reworking all types of SMDs. Watch video for examples.
The combination of the exclusive JBC hot air system with protectors, tripods and extractors ensures desoldering components easily and safety, concentrating the heat on the selected component as show:
Downloads & Resources
Selectable Temperature
150 to 450 ºC (300-840 ºF)
Air flow
5 to 50 SLPM
Temperature profiles:
Design specific thermal profiles to avoid thermal shock during soldering processes. Up to 25 fully configurable soldering profiles can be stored.
Operating modes
Heating / Profiles / Cooling
Vacuum
30% / 228 mmHg / 9 inHg
Connectivity
Type K thermocouple:
Can be used both for Control and Protection purposes.
USB-B (rear)
Software PC
USB-A (front)
Firmware update, Graphics / Profiles management
Robot
RS-232 remote control
Pedal
Optional tool control
Equipotential bonding
Optional connection to EPA
ESD/EOS
ESD safe
Power supply
Peak power
700 W
Ambient operating temp.
10 to 50 ºC / 50 to 120 ºF
Dimensions and weight
Premium Stations
230 x 148 x 160 mm / 4.93 kg.
9.06 x 5.83 x 6.30 in / 10.86 lb.
Package
474 x 368 x 195 mm / 6.01 kg.
18.66 x 14.49 x 7.68 in / 13.25 lb.
REWORK
DDSE – 2 Tools DDE Station with Electric Pump
The DDSE station is a complete solution to rework circuits with T245 General Purpose Handle and DR560 Desoldering Iron.
The DDE Control Unit manages up to 2 tools simultaneously and is fully compatible with 10 different JBC tools. Check below the complete list of compatible tools.
The MSE Electric Desoldering Module generates the vacuum needed to remove the molten solder from plated through holes and surface mount pads with the DR560.
It provides the best soldering quality thanks to JBC Most Efficient Soldering System and additionally Sleep & Hibernation modes help to extend life of tips.
It features all the Excellence range benefits such as station customization, full control of soldering processes and remote work management.
With the practical Cartridge Holder SCH-A the different cartridges are always stored nearby.
Downloads & Resources
Selectable Temperature
90 to 450 ºC / 190 to 840 ºF
Vacuum
75% / 570 mmHg / 22.4 inHg
Flow rate
9 SLPM
Connectivity
USB-B (rear)
Software PC / Traceability
USB-A (front)
Firmware update Soldering Graphics management
Robot
RS-232 remote control or Smart Fume Extractor connection.
Equipotential bonding
Optional connection to EPA
ESD/EOS
ESD safe
Tip to ground resistance
<2 ohms
Tip to ground voltage
<2 mV RMS
Power supply
Peak power
150 W per tool – 23.5 V
Ambient operating temp.
10 to 50 ºC / 50 to 120 ºF
Dimensions and weight
Control Unit
148 x 120 x 232 mm / 3.82 kg
5.8 x 4.7 x 9.1 in / 8.41 lb
Package
368 x 474 x 195 mm / 10.39 kg
14.5 x 18.7 x 7.7 in / 22.91 lb
DMSE – 2 Tools DME Station with Electric Pump
The DME manages up to 4 tools simultaneously and is fully compatible with 10 different JBC tools. Check below for the complete list of compatible tools.
The MSE Electric Desoldering Module is indispensable for a complete desoldering process.
It provides the best soldering quality thanks to JBC Most Efficient Soldering System and additionally Sleep & Hibernation modes help to extend life of tips.
It features all the Excellence range benefits such as station customization, full control of soldering processes and remote work management.
The DMSE works simultaneously with the DR560 Desoldering Iron and the T245 Handle.
Downloads & Resources
Selectable Temperature
90 to 450 ºC / 190 to 840 ºF
Vacuum
75% / 570 mmHg / 22.4 inHg
Flow rate
9 SLPM
Connectivity
USB-B (rear)
Software PC / Traceability
USB-A (front)
Firmware update.
Soldering Graphics / Profiles management.
Dino-Lite USB microscope connection. Compatible models: AM2011 and AM2111.
Robot
RS-232 remote control or Smart Fume Extractor connection
LAN
Remote control / Traceability
Equipotential bonding
Optional connection to EPA
ESD/EOS
ESD safe
Tip to ground resistance
<2 ohms
Tip to ground voltage
<2 mV RMS
Power supply
Peak power
160 W per tool – 23.5 V
Ambient operating temp.
10 to 50 ºC / 50 to 120 ºF
Dimensions and weight
Control Unit
148 x 120 x 232 mm / 4.57 kg
5.8 x 4.7 x 9.1 in / 10.08 lb
Package
368 x 474 x 195 mm / 11.11 kg
14.5 x 18.7 x 7.7 in / 24.49 lb
DMPSE – 4 Tools DME Station with Electric Pump
The DME manages up to 4 tools simultaneously and is fully compatible with 10 different JBC tools. Check below the complete list of compatible tools.
The MSE Electric Desoldering Module is indispensable for a complete desoldering process.
It provides the best soldering quality thanks to JBC Most Efficient Soldering System and additionally Sleep & Hibernation modes help to extend life of tips.
It features all the Excellence range benefits such as station customization, full control of soldering processes and remote work management.
Although the Control Unit is compatible with 10 different JBC tools, the DMPVE works simultaneously with the T210 Precision Purpose Handle, the T245 General Purpose Handle, the AM120 Micro Tweezers and the DR560 Desoldering Iron.
Downloads & Resources
Selectable Temperature
90 to 450 ºC / 190 to 840 ºF
Vacuum (at 6 bar)
75% / 570 mmHg / 22.4 inHg
Flow rate (at 6 bar)
9 SLPM
Connectivity
USB-B (rear)
Software PC / Traceability
USB-A (front)
Firmware update.
Soldering Graphics / Profiles management.
Dino-Lite USB microscope connection. Compatible models: AM2011 and AM2111.
Robot
RS-232 remote control or Smart Fume Extractor connection
LAN
Remote control / Traceability
Equipotential bonding
Optional connection to EPA
ESD/EOS
ESD safe
Tip to ground resistance
<2 ohms
Tip to ground voltage
<2 mV RMS
Power supply
Peak power
160 W per tool – 23.5 V
Ambient operating temp.
10 to 50 ºC / 50 to 120 ºF
Dimensions and weight
Control Unit
148 x 120 x 232 mm / 4.57 kg
5.8 x 4.7 x 9.1 in / 10.08 lb
Package
368 x 474 x 195 mm / 11.11 kg
14.5 x 18.7 x 7.7 in / 24.49 lb
RMSE – Complete Rework Station with Electric Pump
The quickest and safest solution for soldering and rework, also using Hot Air. It consists of stackable modules and all the necessary accessories to make your job easier.
The RMSE features all the Excellence range benefits. It provides the best soldering quality thanks to JBC Most Efficient Soldering System and additionally Sleep & Hibernation modes help to extend life of tips.
The DDE manages up to 2 tools simultaneously and is fully compatible with 10 different JBC tools. Check below the complete list of compatible tools.
The MSE Electric Desoldering Module is indispensable for a complete desoldering process.
The JTSE Precision Hot Air Station controls the rework task using temperature and air flow profiles.
The RMSE works simultaneously with the DR560 Desoldering Iron, the T245 Handle and the JT-TA Heater Hose Set.
Downloads & Resources
Temperature (DDE)
90 to 450 ºC / 190 to 840 ºF
Temperature (JTSE)
150 to 450 ºC / 300-840 ºF
Air Flow (JTSE)
5 to 50 SLPM
Operation modes (JTSE)
Heating / Profiles / Cooling
Vacuum (MSE)
75% / 570 mmHg / 22.4 inHg
Flow rate (MSE)
9 SLPM
Vacuum (JTSE)
30% / 228 mmHg / 9 inHg
Connectivity
USB-B (rear)
Software PC / Traceability
USB-A (front)
Firmware update.
Soldering Graphics / Profiles management.
Robot
RS-232 remote control or Smart Fume Extractor connection
Type K thermocouple (JTSE)
Can be used both for Control and Protection purposes.
Pedal
Optional tool control
Equipotential bonding
Optional connection to EPA
ESD/EOS
ESD safe
Tip to ground resistance
<2 ohms
Tip to ground voltage
<2 mV RMS
Power supply
Peak Power (DDE)
150 W per tool – 23.5 V
Peak Power (JTSE)
700W
Ambient operating temp.
10 to 50 ºC / 50 to 120 ºF
Dimensions and weight
Dimensions/Net weight
See individual modules
Package
370 x 480 x 380 mm / 16.50 kg
14.6 x 18.9 x 15.0 in / 36.38 lb
SRWS-S – SMD Rework System
SRWS rework system provides full control over SMD components rework processes.
The Hot Air Station JTSE controls the rework task using temperature and air flow profiles.
The Rework Arm RWS supports the Hot Air Heater allowing handsfree operation.
The Pre Heater Set PHSE-K comes with an Infrared Heater and a PCB Support.
A variety of Protectors, Extractors and Tripods are included.
Downloads & Resources
Common Data:
Voltage
according to model:
120V / 230V / 100V
ESD safe
Package weight
19,72 kg (43.48lb)
Package dimensions
700 x 410 x 390 mm
27.56 x 16.14 x 15.35 in
WIRE STRIPPER
WS – High-Temperature Wire Stripper Station
The WS is specially designed for stripping high-temperature wire insulations til 800 ºC / 1470 ºF made of thermostable materials such as teflon*, kapton*, silicone rubber, etc, from 36 to 18 AWG (0,127 to 1,020 mm)
The WS incorporates predeterminated power levels for each type of material. In addition, it features a customized working mode.
This station comes with the comfortable WS440 Tweezers and it is only compatible with W440 blade cartridges.
Cartridge customization is available to satisfy any special requirement. Contact us on customtips@jbctools.com
* Registered Trade Marks of DuPont
Downloads & Resources
Max. temperature
800 ºC / 1470 ºF
Connectivity
USB-B (front)
Firmware upgrade
Equipotential bonding
Optional connection to EPA
ESD safe
Dimensions and weight
Control Unit
90 x 105 x 180 mm / 2,2 kg
3.5 x 4.1 x 7.1 in / 4.85 lb